Click to zoom
Product short description:
  • Tethered Agility™ Config Tool mobile application
  • For Acromag SP Series Signal Splitters and most TT Series Transmitters
  • Download available on Google Play for free.
  • Download Windows configuration software from the software tab below.

Agility™ Config Tool (Tethered) Description

The Agility™ Tethered Config Tool is a mobile application that allows easy setup and configuration of Acromag’s DT Series and TT Series transmitters (except model TT231); as well as Acromag SP Series Signal Splitters, via a tethered mobile device.

TT Series and SP Series require one 4001-113 cable for configuration with Windows®  when not using a USB Isolator.
TT Series and SP Series require one 5028-565 OTG cable and one 4001-113 cable when using the Agility™ app with an Android® device.

Demo the software, no need for a module. To enter demo mode simple tap the arrow icon in the upper left corner 8 times.

Note that TT Series and SP Series config tool is only available on Google Play.
Agility™ Tethered Config Tool is available for free.

Features & Benefits

  • Connects to Acromag SP Series signal splitters
    • Requires the use of USB OTG Cable (Acromag part #: 5028-565)
    • and USB A to Mini B Cable (Acromag part #: 4001-113)
    • Configures and calibrates SP230 and SP330 Series products via phone or tablet running Android 4.3 ICS (Ice Cream Sandwich) or later
  • Connects to Acromag TT Series transmitters, except models TT231 and TT233
    • Requires the use of USB OTG Cable; Acromag part #: 5028-565
    • and USB A to Mini B Cable;Acromag part #: 4001-113
    • Configures and calibrates TT Series products via phone or tablet running Android 4.0 ICS (Ice Cream Sandwich) or later.
  • View wiring diagrams, even without an internet connection
  • Perform quick and easy field diagnostics and troubleshooting
  • Ideal for field technicians
  • Trend and share field data
How to Use Process Transmitters to Provide a High Voltage Output Up to ±20V DC - 8400973
Defining the Problem: We are developing a 12V DC battery simulator that reaches 14.4V when charging. Our controller output cards are limited to 10V and we need a device that can step up the output to 15V. Typical process signal conditioners have standard ranges of 10V maximum. We require a device with a higher output...
How to Split Gas Detector Outputs for Monitoring & Process Control - 8400861
Defining the Problem: At a remote wastewater pumping station, Methane (CH4) and Hydrogen Sulfide (H2S) are monitored with MSA X5000 Gas Monitors. The 4-20mA outputs must be split to a GasCard XL Controller and Emerson Ovation I/O. The Controller has powered inputs, but the Ovation inputs require an external power source. Typical splitters have two...
How to use Thermocouple Transmitters to Monitor Temperatures in Paint Systems - 8400818
This document illustrates using Acromag’s TT330 Series to monitor high temperatures in an automotive paint curing oven and transmit to the existing PLC 4-20mA input card/software setup. Defining the Problem The area around an auto manufacturer’s paint curing ovens is at elevated temperatures affecting the performance of locally installed instrumentation. Placing Signal Conditioners rated for...
Agility Config Tool (Tethered) (Log in to download the file)
SP Series Windows Configuration Software (Log in to download the file)

Additional information

Product Series

DT230 Series, DT330 Series, SP230 Series, SP330 Series, TT230 Series, TT330 Series

Configuration

Agility Mobile App, Factory Calibration, USB Configuration, Windows Software Configuration

  • Description

    Agility™ Config Tool (Tethered) Description

    The Agility™ Tethered Config Tool is a mobile application that allows easy setup and configuration of Acromag’s DT Series and TT Series transmitters (except model TT231); as well as Acromag SP Series Signal Splitters, via a tethered mobile device.

    TT Series and SP Series require one 4001-113 cable for configuration with Windows®  when not using a USB Isolator.
    TT Series and SP Series require one 5028-565 OTG cable and one 4001-113 cable when using the Agility™ app with an Android® device.

    Demo the software, no need for a module. To enter demo mode simple tap the arrow icon in the upper left corner 8 times.

    Note that TT Series and SP Series config tool is only available on Google Play.
    Agility™ Tethered Config Tool is available for free.

    Features & Benefits

    • Connects to Acromag SP Series signal splitters
      • Requires the use of USB OTG Cable (Acromag part #: 5028-565)
      • and USB A to Mini B Cable (Acromag part #: 4001-113)
      • Configures and calibrates SP230 and SP330 Series products via phone or tablet running Android 4.3 ICS (Ice Cream Sandwich) or later
    • Connects to Acromag TT Series transmitters, except models TT231 and TT233
      • Requires the use of USB OTG Cable; Acromag part #: 5028-565
      • and USB A to Mini B Cable;Acromag part #: 4001-113
      • Configures and calibrates TT Series products via phone or tablet running Android 4.0 ICS (Ice Cream Sandwich) or later.
    • View wiring diagrams, even without an internet connection
    • Perform quick and easy field diagnostics and troubleshooting
    • Ideal for field technicians
    • Trend and share field data
  • Tech Papers

    How to Use Process Transmitters to Provide a High Voltage Output Up to ±20V DC - 8400973
    Defining the Problem: We are developing a 12V DC battery simulator that reaches 14.4V when charging. Our controller output cards are limited to 10V and we need a device that can step up the output to 15V. Typical process signal conditioners have standard ranges of 10V maximum. We require a device with a higher output...
    How to Split Gas Detector Outputs for Monitoring & Process Control - 8400861
    Defining the Problem: At a remote wastewater pumping station, Methane (CH4) and Hydrogen Sulfide (H2S) are monitored with MSA X5000 Gas Monitors. The 4-20mA outputs must be split to a GasCard XL Controller and Emerson Ovation I/O. The Controller has powered inputs, but the Ovation inputs require an external power source. Typical splitters have two...
    How to use Thermocouple Transmitters to Monitor Temperatures in Paint Systems - 8400818
    This document illustrates using Acromag’s TT330 Series to monitor high temperatures in an automotive paint curing oven and transmit to the existing PLC 4-20mA input card/software setup. Defining the Problem The area around an auto manufacturer’s paint curing ovens is at elevated temperatures affecting the performance of locally installed instrumentation. Placing Signal Conditioners rated for...
  • Specs & Data Sheets

  • Software

    Agility Config Tool (Tethered) (Log in to download the file)
    SP Series Windows Configuration Software (Log in to download the file)
  • Accessories

  • Additional information

    Additional information

    Product Series

    DT230 Series, DT330 Series, SP230 Series, SP330 Series, TT230 Series, TT330 Series

    Configuration

    Agility Mobile App, Factory Calibration, USB Configuration, Windows Software Configuration