4683 Series: RS485-to-RS485 Network Repeater
Please sign in or register to see model options and to add products to your cart.
Product short description:
- Designed for use with Johnson Controls N2 or BACnet MS/TP bus
- 115V AC ±10%, 50/60 Hz, 0.05A or 230V AC ±10%, 50/60 Hz, 0.03A or 24V AC ±10%, 50/60 Hz, 0.18A typical power
- Operating temperature: -25 to 70° C (-13 to 158° F)
4683-TTM-1F: 115V AC Power
4683-TTM-2F: 230V AC Power
4683-TTM-3F: 24V AC Power
4683 Series: RS485-to-RS485 Network Repeater Description
4683-TTM-1F: 115V AC Power
4683-TTM-2F: 230V AC Power
4683-TTM-3F: 24V AC Power
Acromag’s RS-485 network repeater device allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities. In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.
Operation is transparent to all devices and no handshaking is required. Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate.
Or, for a harsh environment, it can be installed in a NEMA enclosure of your choice. No enclosure is necessary for use in a laboratory or office. Installation requires mounting, connecting power and cables, and setting the baud rate.
Approvals
UL/cUL listed: Energy management equipment
4683 Series: RS485-to-RS485 Network Repeater Operation
Model 4683-TTM-xF network repeaters isolate and boost RS-485 signals allowing communication signals to travel another 4000 ft. Each repeater permits the addition of another 32 unit load to a network.
The repeater has two RS-485 “sides” known as the A and B sides. The A side typically connects to the network towards the host and the B side connects to the extended network. Functionally, the A and B sides are equivalent.
Repeaters receive AC power through a 3-screw terminal strip. Transient signal protection is provided on both RS-485 sides.
When both RS-485 lines are idle, each side is in receive mode. When a ‘1’ to ‘0’ transition is detected (signifying a start bit) on either side, the opposite side’s transmitter is enabled. The transmitter stays enabled for one character’s time (based on the baud rate switch setting). The received character is then passed through.
4683 Series: RS485-to-RS485 Network Repeater Features & Benefits
- Designed for use with Johnson Controls N2 or BACnet bus.
- I/O signal isolation. No handshaking. No extra control lines.
- Baud rates of 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, and 76.8K are switch selectable.
- Field-selectable end-of-line network terminations on both A and B sides.
- Electrical transient protection is provided. This protects the host computer from destructive noise spikes and other transient signals.
- Status LED’s indicate transmission direction and power applied.
- 115V, 230V, and 24V AC power models available
Specifications
Manuals
4683-TTM-xF User Manual (Log in to download the file)
Additional information
Weight | 48 oz |
---|---|
Dimensions | 7 × 4.5 × 2.5 in |
Part Number | 4683-TTM-1F: 115V AC power, 4683-TTM-2F: 230V AC power, 4683-TTM-3F: 24V AC power |
Communication | Modbus-RTU, RS422/485 |
Product Series | 4683 Series, BusWorks 900MB |
-
Description
4683 Series: RS485-to-RS485 Network Repeater Description
4683-TTM-1F: 115V AC Power
4683-TTM-2F: 230V AC Power
4683-TTM-3F: 24V AC PowerAcromag’s RS-485 network repeater device allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities. In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.
Operation is transparent to all devices and no handshaking is required. Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate.
Or, for a harsh environment, it can be installed in a NEMA enclosure of your choice. No enclosure is necessary for use in a laboratory or office. Installation requires mounting, connecting power and cables, and setting the baud rate.
Approvals
UL/cUL listed: Energy management equipment4683 Series: RS485-to-RS485 Network Repeater Operation
Model 4683-TTM-xF network repeaters isolate and boost RS-485 signals allowing communication signals to travel another 4000 ft. Each repeater permits the addition of another 32 unit load to a network.
The repeater has two RS-485 “sides” known as the A and B sides. The A side typically connects to the network towards the host and the B side connects to the extended network. Functionally, the A and B sides are equivalent.
Repeaters receive AC power through a 3-screw terminal strip. Transient signal protection is provided on both RS-485 sides.
When both RS-485 lines are idle, each side is in receive mode. When a ‘1’ to ‘0’ transition is detected (signifying a start bit) on either side, the opposite side’s transmitter is enabled. The transmitter stays enabled for one character’s time (based on the baud rate switch setting). The received character is then passed through.
4683 Series: RS485-to-RS485 Network Repeater Features & Benefits
- Designed for use with Johnson Controls N2 or BACnet bus.
- I/O signal isolation. No handshaking. No extra control lines.
- Baud rates of 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, and 76.8K are switch selectable.
- Field-selectable end-of-line network terminations on both A and B sides.
- Electrical transient protection is provided. This protects the host computer from destructive noise spikes and other transient signals.
- Status LED’s indicate transmission direction and power applied.
- 115V, 230V, and 24V AC power models available
-
Tech Papers
What is Modbus/RS485? An Introduction - 8500648 (Log in to view the file)Modbus/RS485 Network an Introduction White Paper This white paper describes the operation of Modbus as it relates to Acromag Series 900MB I/O modules. Learn more: What is Ethernet/IP? -
Specs & Data Sheets
Specifications
Manuals
4683-TTM-xF User Manual (Log in to download the file)
-
Additional information
Additional information
Weight 48 oz Dimensions 7 × 4.5 × 2.5 in Part Number 4683-TTM-1F: 115V AC power, 4683-TTM-2F: 230V AC power, 4683-TTM-3F: 24V AC power
Communication Modbus-RTU, RS422/485
Product Series 4683 Series, BusWorks 900MB
Please login to submit this form.