• 0-11mA, 0-20mA, 4-20mA, ±20mA, or 0-20 amps AC Input
• 16 analog single-ended current input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1230 offers an isolated Ethernet network interface for up to to sixteen single-ended current input channels.

• Dual inputs
• 0±150V input
• 4-20mA outputs (sink/source)
• 7-32V DC loop/local power

The DT238 model is a two-wire dual transmitter that isolates and converts high-level DC voltage inputs to proportional 4-20mA control signals. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short video highlighting the features of the DT238.

• 100 ohm Pt RTD or 0-900 ohm input
• 4-20mA output (sink/source)
• 12-32V DC loop/local power
• USB configuration

The TT231 model is a space-saving two-wire transmitter that converts a 100 ohm Platinum RTD sensor input to a proportional 4-20mA signal. Power is received from the output loop current or a DC supply when using a three-wire connection. Click here to watch a short AcroMaggie video highlighting the TT230 Series.

• Input: ±5V, ±10V, 0-5V, 0-10V
• 16 analog single-ended voltage input channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1240 offers an isolated Ethernet network interface for up to to sixteen single-ended voltage input channels.

• 16 discrete tandem input/output channels
• Modbus TCP/IP, Ethernet/IP, Profinet, or i20 communication

The XT1120 interfaces discrete I/O signals between measurement and control devices over Ethernet. Channels are individually configurable for input or high-side switched output operation.

• 4 Analog DC Current Outputs
• 4 Discrete Voltage I/O Channels
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1530 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.

• 8 Analog DC Voltage Outputs ±10V (calibrated), ±5V (sub-range)
• 4 Discrete Voltage I/O Channels 0-32V DC
• 12 to 32V DC Power (2.8W)
• Modbus TCP/IP, Ethernet/IP, Profinet
• i2o® peer-to-peer available for Modbus TCP/IP only

The XT1540 interfaces analog output and discrete I/O signals between measurement and control devices over Ethernet. Discrete I/O are individually configurable for input or high-side switched output operation.

• Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt (±100mV DC), resistance (0 to 500 ohms) input
• Single or dual mechanical relay alarm outputs
• 10-36V DC power
• Software configured
• Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection)
• On/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.

• Thermocouple, RTD, milliVolt, and Resistance Input
• 0 to 20mA DC, 0 to 10V DC output
• Limit Alarm
• 10-36V DC power
• Software configured
• Performs linearization, square root extraction, and optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• ±100V or 0 to 22mA DC input ranges or 2 input channels, ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
• Single or dual mechanical relays
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.  

• ±100V or 0 to 22mA DC input ranges (AC current with optional sensor)
• 0 to 20mA DC, 0 to 10V DC output
• Mechanical relay alarm (25V @ 5A)
• 10-36V DC power
• Software configured, performs linearization, square root extraction, and optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• 2 input channels, thermocouple (types J, K, T, R, S, E, B, N), or millivolt (±100mV DC) input
• Dual mechanical relays output
• 10-36V DC power
• Software configured; multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection); on/off controller capability

IntelliPack alarms compare inputs against user-defined limit set-points to control built-in relays.

• 0 to 50KHz, 0 to 65535 pulses input
• 0 to 20mA DC, 0 to 10V DC output
• Mechanical alarm relay (25V @ 5A)
• 10-36V DC power
• Software configured; pulse counter; signal averaging; optional limit alarm functions

These transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

• 2 or 4 input channels, 0 to 20mA DC, 0 to 10V DC (selectable ranges)
• 0 to 20mA DC, 0 to 10V DC (selectable ranges) output
• 10-36V DC power
• Software configured, computes arithmetic operations, evaluates conditional and Boolean arguments, executes track & hold functions

IntelliPack math modules perform complex mathematical computations and convert DC input signals to scaled DC or frequency outputs. They are ideal for isolating and interfacing analog signals to a PLC or controller as a voltage, current, or a pulsed input.

• 0 to 20mA DC, 0 to 10V DC (selectable ranges), 896M 2 channels input
• 0 to 10KHz, 0 to 36,000 counts/hr Frequency output, 896M 2 channels
• Solid-state relay (60V DC @ 500mA) control output
• 10-36V DC power
• Software configured, ideal for integrator/totalizer applications, computes arithmetic operations, conditional arguments, track & hold functions

IntelliPack math modules perform complex mathematical computations and convert DC input signals to scaled DC or frequency outputs.

• Active-Low Inputs, Sinking Outputs (Low-Side Switching)
• 12 input and/or 12 output channels
• 0 to 35V DC I/O range
• 10 to 36V DC, 24V AC power
• Modbus-RTU high-speed RS-485

These modules provide twelve discrete input and/or output channels. Isolation separates the I/O, power, and network circuits. Network communication adheres to the industry-standard RS-485 Modbus-RTU protocol.