Click to zoom

Please sign in or register to see model options and to add products to your cart.

Product short description:
  • One or two 1553 interface channels
  • DDC Micro-ACE controls 1553 interface

IP570: MIL-STD-1553 Bus Interface Modules Description

IP570 modules offer a choice of one or two channels to interface sensors and other devices to a 1553 bus.

MIL-STD-1553 (1553) is a digital internal time division command/response multiplex data bus. It is a military standard which has become one of the basic tools used by the U.S. Department of Defense for integration of weapon systems. MIL-STD-1553 describes the method of communication and the electrical interface requirements for subsystems connected to the data bus. Since its introduction, MIL-STD-1553 applications have extended to systems integration of flight controls, propulsion controls, and vehicle management (electrical, hydraulic, environmental control, etc.).

MIL-STD-1553 is designed for use in one of three forms:

Bus Controller (BC) – There is only one Bus Controller at a time on any MIL-STD-1553 bus. It initiates all message communication over the bus.

Remote Terminal (RT) – Up to 31 remote terminals can be present in the system.

Bus Monitor (BM) – A Bus Monitor cannot transmit messages over the data bus. Its primary role is to monitor and record bus transactions without interfering with operation of the Bus Controller or the Remote Terminals. Bus Monitor is often configured to record a subset of the transactions, based on criteria provided by the application program.

Update to AcroPack mezzanine modules into your host system, they maintain the same functionality and memory map of Acromag’s existing Industry Pack (IP) modules. Learn More >

MIL-STD-1553 is ideal for these applications:

  • Missile system testing
  • Air traffic control system testing
  • On-board aircraft system monitoring
  • Satellite test systems
  • Aircraft simulators

Update to AcroPack mezzanine modules into your host system, they maintain the same functionality and memory map of Acromag’s existing Industry Pack (IP) modules. Learn More >

IP570: MIL-STD-1553 IP Module Feature & Benefits

  • One or two complete dual-redundant MIL-STD-1553 bus interfaces
  • Supports both MIL-STD-1553 revision B and MIL-STD-1760 transceivers
  • All channels are transformer coupled
  • Data rates of up to 1Mb/s
  • Supports both 8 MHz and 32MHz IP operation
  • DDC Micro-ACE controls 1553 interface
    • Fully integrates 1553 Rev A/B Notice 2 terminal
    • Supports transceiver power-down options
    • Supports enhanced Mini-ACE architecture
    • Supports multiple configurations with 64K RAM: bus controller, remote terminal, or bus monitor
    • Supports 1553 Rev A/B Notice 2 and STANAG 3838 protocols
    • MIL-STD-1760 amplitude compliant transceiver
    • Provides highly flexible host-side interface
    • Compatible with Mini-ACE and ACE
    • Provides highly autonomous bus controller with built-in message sequence controller
    • Offers choice of single, dual, and circular remote terminal buffering options
    • Provides selective message monitor
    • Includes comprehensive built-In self-test
    • 16MHz clock
    • Software libraries and drivers available for Windows® 2000/XP/Vista/7 (32-bit), VxWorks® and Linux

Manuals

IP570 User Manual (Log in to download the file)

Drawings & Diagrams

(Log in to download the file)
IPSW-API-LNX (Log in to download the file)
IPSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Compare

    CS-IP Conformal Coat

    Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated
    Select options

Additional information

Weight 8 oz
Dimensions 4 × 2 × 1 in
Part Number

IP571: single-channel, IP572: dual-channel, IP572E: dual-channel, extended temperature range.

Product Series

Industry Pack

  • Description

    IP570: MIL-STD-1553 Bus Interface Modules Description

    IP570 modules offer a choice of one or two channels to interface sensors and other devices to a 1553 bus.

    MIL-STD-1553 (1553) is a digital internal time division command/response multiplex data bus. It is a military standard which has become one of the basic tools used by the U.S. Department of Defense for integration of weapon systems. MIL-STD-1553 describes the method of communication and the electrical interface requirements for subsystems connected to the data bus. Since its introduction, MIL-STD-1553 applications have extended to systems integration of flight controls, propulsion controls, and vehicle management (electrical, hydraulic, environmental control, etc.).

    MIL-STD-1553 is designed for use in one of three forms:

    Bus Controller (BC) – There is only one Bus Controller at a time on any MIL-STD-1553 bus. It initiates all message communication over the bus.

    Remote Terminal (RT) – Up to 31 remote terminals can be present in the system.

    Bus Monitor (BM) – A Bus Monitor cannot transmit messages over the data bus. Its primary role is to monitor and record bus transactions without interfering with operation of the Bus Controller or the Remote Terminals. Bus Monitor is often configured to record a subset of the transactions, based on criteria provided by the application program.

    Update to AcroPack mezzanine modules into your host system, they maintain the same functionality and memory map of Acromag’s existing Industry Pack (IP) modules. Learn More >

    MIL-STD-1553 is ideal for these applications:

    • Missile system testing
    • Air traffic control system testing
    • On-board aircraft system monitoring
    • Satellite test systems
    • Aircraft simulators

    Update to AcroPack mezzanine modules into your host system, they maintain the same functionality and memory map of Acromag’s existing Industry Pack (IP) modules. Learn More >

    IP570: MIL-STD-1553 IP Module Feature & Benefits

    • One or two complete dual-redundant MIL-STD-1553 bus interfaces
    • Supports both MIL-STD-1553 revision B and MIL-STD-1760 transceivers
    • All channels are transformer coupled
    • Data rates of up to 1Mb/s
    • Supports both 8 MHz and 32MHz IP operation
    • DDC Micro-ACE controls 1553 interface
      • Fully integrates 1553 Rev A/B Notice 2 terminal
      • Supports transceiver power-down options
      • Supports enhanced Mini-ACE architecture
      • Supports multiple configurations with 64K RAM: bus controller, remote terminal, or bus monitor
      • Supports 1553 Rev A/B Notice 2 and STANAG 3838 protocols
      • MIL-STD-1760 amplitude compliant transceiver
      • Provides highly flexible host-side interface
      • Compatible with Mini-ACE and ACE
      • Provides highly autonomous bus controller with built-in message sequence controller
      • Offers choice of single, dual, and circular remote terminal buffering options
      • Provides selective message monitor
      • Includes comprehensive built-In self-test
      • 16MHz clock
      • Software libraries and drivers available for Windows® 2000/XP/Vista/7 (32-bit), VxWorks® and Linux
  • Specs & Data Sheets

    Manuals

    IP570 User Manual (Log in to download the file)

    Drawings & Diagrams

  • Software

    (Log in to download the file)
    IPSW-API-LNX (Log in to download the file)
    IPSW-API: I/O Functions Routines Information Page (Log in to download the file)
  • Accessories

    • Compare

      CS-IP Conformal Coat

      Industry Pack conformal coat. This option should be selected to prevent high temperature and humidity issues (like blotching) when boards are conformal coated
      Select options
  • Additional information

    Additional information

    Weight 8 oz
    Dimensions 4 × 2 × 1 in
    Part Number

    IP571: single-channel, IP572: dual-channel, IP572E: dual-channel, extended temperature range.

    Product Series

    Industry Pack