Click to zoom
$1,790
Clear
Product short description:
  • 8 voltage output channels
  • Individual 16-bit D/A converter on each channel
  • Individual clock on each channel supporting rates of up to 100KHz
  • FIFO memory buffers (128 samples/channel)
RSS
TWITTER
Visit Us
Follow Me
LINKEDIN
Share

IP236A-8 modules have 16-bit D/A converters (DAC) to provide highly-accurate analog voltage outputs. FIFO buffers enhance control over the transfer of data to the DAC and improve efficiency.

Each channel has a dedicated 128 sample FIFO buffer and its own clock. A start trigger transfers digital values from the buffer to the DAC. Three modes offer several choices for the data transfer on each channel. Continuous mode cycles data through the buffer for a given channel and is ideal for waveform generation. As new data loads into the FIFO, the output signal instantly updates without stopping the waveform. Single mode moves one value from the buffer to the converter for each trigger. External trigger mode synchronizes channel conversions to an event or other IP236A-8 modules.

Specifications

Analog Outputs

Output configuration: 8
D/A Resolution: 16 bits
Output ranges: ±5V, ±10V, 0 to 10V (jumper-selectable).
Data sample memory: 128 sample FIFO buffer on each channel.
Maximum throughput rate: Outputs can be updated simultaneously or individually.
One channel: 100KHz (10μS/conversion)
Eight channels: 100KHz (10μS/8 ch).
DAC programming: Independent. Input registers and FIFOs are directly loaded.
System accuracy: 0.0061% of 20V span maximum corrected error (i.e. calibrated) at 25°C with the output unloaded.
Output at reset: 0V for bipolar output, 5V for unipolar.
Output current: -5 to +5mA (maximum).
Short circuit protection: Indefinite at 25°C.

IP Compliance (ANSI/VITA 4)

Meets IP specifications per ANSI/VITA 4-1995.
IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*), Interrupt select (INTsel*).
Access Times (8MHz clock): All functions: 0 wait states (250nS cycle) except FIFO buffer write: 2 wait state (500nS cycle),
Interrupt read/write: 2 wait states (250nS cycle).

Environmental

Operating temperature: 0 to 70°C (IP236A-8) or -40 to 85°C (IP236-8E models).
Storage temperature: -55 to 125°C (all models).
Relative humidity: 5 to 95% non-condensing
Power: +5V (±5%): 250mA maximum. ±12V (±5%) from P1: 210mA maximum.
MTBF: Consult factory.

  • 8 analog voltage outputs
  • Individual 16-bit D/A converter on each channel
  • Individual clock on each channel supporting rates of up to 100KHz
  • FIFO memory buffers (128 samples/channel)
  • Software, external, or internal timer triggers
  • Interrupt capability
  • External trigger output
  • Extended temperature option (-40 to 85°C)
  • FIFO buffers enable “on-the-fly” changes to the output waveform as new data is received
  • Internally-stored calibration coefficients ensure accuracy
  • Independent control of each channel enables individual updates and unique conversion rates

Manuals

IP236A User Manual (Log in to download the file)

Known Difference Statement for IP230/235/236 and PMC230 (Log in to download the file)

Drawings & Diagrams

IPSW-API-LNX (Log in to download the file)
  • Compare

    502x Cable Series

    • Communication Signal Cables
    • Wide assortment of ribbon cables
    $40$600
    Select options
  • Compare

    IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

    • Use with IndustryPack modules/carriers
    • Easy installation procedure
    • Help files with step-by-step instructions
    • Demonstration Program
    • Driver level support for desktop and embedded Windows level programming environments
    $375$1,005
    Select options
  • Compare

    Termination Products

    • DIN rail-mount panels
    • 50 screw terminals on 50-pin connector termination panels
    • 50 screw terminals on SCSI-2 connector termination panels
    • 68 screw terminals on SCSI-3 connector termination panels
    $165$225
    Select options
  • Compare

    Transition Modules

    • Various transition modules
    $225$980
    Select options

Additional information

Weight N/A
Dimensions N/A
Part Number

TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812A / VPX4814A

  • Description

    These adapters repeat field I/O connections on Acromag’s carrier cards for front or rear exit from the card cage.

    Transition modules provide a solution for controlling the location of your cabling within the card cage.

    TRANS-200: Transition module for AVME9670 board. See AVME9670 manual for more information.

    VPX4500-RTM-LF: Rear transition module used with both the VPX4500E-LF and the VPX4500-CC-LF carriers to provide access to the slot C AcroPack field I/O signals. See carrier card user manual for more information

     

     

  • Features & Benefits

    • 8 analog voltage outputs
    • Individual 16-bit D/A converter on each channel
    • Individual clock on each channel supporting rates of up to 100KHz
    • FIFO memory buffers (128 samples/channel)
    • Software, external, or internal timer triggers
    • Interrupt capability
    • External trigger output
    • Extended temperature option (-40 to 85°C)
    • FIFO buffers enable “on-the-fly” changes to the output waveform as new data is received
    • Internally-stored calibration coefficients ensure accuracy
    • Independent control of each channel enables individual updates and unique conversion rates
  • Specs & Data Sheets

    Manuals

    IP236A User Manual (Log in to download the file)

    Known Difference Statement for IP230/235/236 and PMC230 (Log in to download the file)

    Drawings & Diagrams

  • Software

    IPSW-API-LNX (Log in to download the file)
  • Accessories

    • Compare

      502x Cable Series

      • Communication Signal Cables
      • Wide assortment of ribbon cables
      $40$600
      Select options
    • Compare

      IPSW-API: I/O Function Routines for VxWorks, Windows, Linux

      • Use with IndustryPack modules/carriers
      • Easy installation procedure
      • Help files with step-by-step instructions
      • Demonstration Program
      • Driver level support for desktop and embedded Windows level programming environments
      $375$1,005
      Select options
    • Compare

      Termination Products

      • DIN rail-mount panels
      • 50 screw terminals on 50-pin connector termination panels
      • 50 screw terminals on SCSI-2 connector termination panels
      • 68 screw terminals on SCSI-3 connector termination panels
      $165$225
      Select options
    • Compare

      Transition Modules

      • Various transition modules
      $225$980
      Select options
  • Additional information

    Additional information

    Weight N/A
    Dimensions N/A
    Part Number

    TRANS-200: Use with AVME9670 & AVME9670E, TRANS-C100: Use with AcPC8635, TRANS-C200: Use with ACPC8625, XBRD-9060-LF: Expansion I/O Carrier Module, XVME-9640-1-LF: Transition Module with P0 connector, XVME-9640-2-LF: Transition Module without P0 connector, TRANS-C4610: Use with AcPC4610, TRANS-C4620: Use with AcPC4620E and AcPC4620CC, TRANS-C5200: Use with AcPC4620E and AcPC4620CC with 128 CMOS I/O, TRANS-C5201: Use with AcPC4620E and AcPC4620CC with 64 EIA485 I/O channels, TRANS-C5210: Use with AcPC8625, VPX4500-RTM-LF: Use with VPX4500E-LF and VPX4500-CC-LF, TRANS-V112-LF: Rear transition module for the VPX4812A / VPX4814A