APCe8670: PCI Express Carrier Card for PMC Modules
Please sign in or register to see model options and to add products to your cart.
Product short description:
- One PMC mezzanine module slot
- Non-Intelligent carrier card
- PCIe x4 interface
Acromag’s APCe8670 carrier card interfaces a PMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
The APCe8670 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted PMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the PMC module connectors.
APCe8670: PCI Express Carrier Card for PMC Modules Description
Acromag’s APCe8670 carrier card interfaces a PMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
The APCe8670 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted PMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the PMC module connectors.
This card is a Peripheral Component Interconnect Express (PCIe) bus card carrier for a PMC module. The carrier card acts as an adapter to bridge between the PCIe bus of your PC and the PCI bus of a PMC module card. Access to PMC P4 rear I/O is provided through connector J6. PMC modules with front I/O can be accessed though the front mounting bracket. A cable is available to connect the J6 rear I/O to a front panel bracket mounted connector located in an adjacent slot.
The I/O signals are accessible via rear connectors and though the front mounting bracket. Cables are available to connect the carrier’s rear I/O to a front panel connector in an adjacent slot.
Select PMC modules from Acromag’s offering of high-performance FPGA and I/O solutions or use any third-party ANSI/VITA 20 compliant mezzanine modules.
Performance Specifications
PMC Compliance
PMC Module: Conforms to CMC/PMC Specification, P1386.1.
PCI/X Bridge: Compliant to the following specifications: PCI Express Base Specification (Rev. 1.1) PCI Express-to-PCI/PCI-X Bridge Specification (Rev. 1.0) PCI-to-PCI Bridge Specification (Rev. 1.2) PCI Local Bus Specification (Rev. 3.0) PCI-X Addendum to PCI Local Bus Specification (Rev. 2.0, mode 1 only) PCI Bus Power Management Interface Specification (Rev. 1.2).
Addressing: 32/64-bit.
Data bus: 32/64-bit.
Interface: Supports up to 100MHz operation.
PCI Express Interface
PCI Express interface: 4 lane, Gen 1 capable.
PCIe bus compliance: This device meets or exceeds all written PCI Express specifications per revision 1.1 dated March 28, 2005.
I/O Interface
Rear I/O (J6) Connector: MD68 (internal SCSI), male.32 LVDS pairs routed from the PMC P4 connector.
Environmental
Operating temperature: 0 to 70°C.
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: The carrier provides 3.3V, 5V, 12V and -12V power to the PMC module. The 12V power source is jumper-selectable from the PCIe bus 12V supply or the PCIe graphics power connector. DC/DC converters generate a 5V or -12V supply from the 12V source. 3.3V (±10%): 0mA. 12V (±5%): ??mA, typical with fan operating. Currents specified are for the carrier board only. For the total current required from each supply, add the PMC module currents.
MTBF: Contact the factory.
Physical
Dimensions: Length:Â 9.342 inches (237.3 mm). Height:Â 4.376 inches (111.2 mm).
Width: Occupies two slots with fan installed (fan is mounted on solder side, height is 10 mm). Occupies one slot with fan removed.
Board thickness: 0.062 inches (1.59 mm).
Connectors
J1, J2, J3: PMC PCI-X signals.
J4 : PMC user signals (rear I/O).
J5: Auxiliary power connector (PCIe graphics).
J6: Board-to-board connection of J4 user signals.
JP1: Power source select jumper.
JP2: JTAG I/O voltage select jumper.
P1: PCI Express V1.1 x4 lanes card edge.
P3: Fan power.
P4: JTAG (Xilinx programming adapter).
Approvals
CE marked, FCC Part 15, Class A
- One PMC module slot
- 4-lane PCI Express interface
- PCI-X interface supports 32/64-bit addressing, 32/64-bit data bus at up to 100MHz operation
- Carrier routes 32 differential pairs to rear connector for LVDS I/O from the PMC module
- JTAG connector supports Xilinx programmer for use with hosted FPGA modules
- Cooling fan
- Auxilliary power connection for 12V source
- Diagnostic LEDs indicate communication speed
-
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31). -
SCSI Cable - 5025-913
- CS Electronics internal SCSI cable
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Part Number | APCe8670: PCI Express carrier card for PMC modules |
-
Description
APCe8670: PCI Express Carrier Card for PMC Modules Description
Acromag’s APCe8670 carrier card interfaces a PMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
The APCe8670 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted PMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the PMC module connectors.
This card is a Peripheral Component Interconnect Express (PCIe) bus card carrier for a PMC module. The carrier card acts as an adapter to bridge between the PCIe bus of your PC and the PCI bus of a PMC module card. Access to PMC P4 rear I/O is provided through connector J6. PMC modules with front I/O can be accessed though the front mounting bracket. A cable is available to connect the J6 rear I/O to a front panel bracket mounted connector located in an adjacent slot.
The I/O signals are accessible via rear connectors and though the front mounting bracket. Cables are available to connect the carrier’s rear I/O to a front panel connector in an adjacent slot.
Select PMC modules from Acromag’s offering of high-performance FPGA and I/O solutions or use any third-party ANSI/VITA 20 compliant mezzanine modules.
Performance Specifications
PMC Compliance
PMC Module: Conforms to CMC/PMC Specification, P1386.1.
PCI/X Bridge: Compliant to the following specifications: PCI Express Base Specification (Rev. 1.1) PCI Express-to-PCI/PCI-X Bridge Specification (Rev. 1.0) PCI-to-PCI Bridge Specification (Rev. 1.2) PCI Local Bus Specification (Rev. 3.0) PCI-X Addendum to PCI Local Bus Specification (Rev. 2.0, mode 1 only) PCI Bus Power Management Interface Specification (Rev. 1.2).
Addressing: 32/64-bit.
Data bus: 32/64-bit.
Interface: Supports up to 100MHz operation.
PCI Express Interface
PCI Express interface: 4 lane, Gen 1 capable.
PCIe bus compliance: This device meets or exceeds all written PCI Express specifications per revision 1.1 dated March 28, 2005.
I/O Interface
Rear I/O (J6) Connector: MD68 (internal SCSI), male.32 LVDS pairs routed from the PMC P4 connector.
Environmental
Operating temperature: 0 to 70°C.
Storage temperature: -55 to 125°C.
Relative humidity: 5 to 95% non-condensing.
Power: The carrier provides 3.3V, 5V, 12V and -12V power to the PMC module. The 12V power source is jumper-selectable from the PCIe bus 12V supply or the PCIe graphics power connector. DC/DC converters generate a 5V or -12V supply from the 12V source. 3.3V (±10%): 0mA. 12V (±5%): ??mA, typical with fan operating. Currents specified are for the carrier board only. For the total current required from each supply, add the PMC module currents.
MTBF: Contact the factory.
Physical
Dimensions: Length:Â 9.342 inches (237.3 mm). Height:Â 4.376 inches (111.2 mm).
Width: Occupies two slots with fan installed (fan is mounted on solder side, height is 10 mm). Occupies one slot with fan removed.
Board thickness: 0.062 inches (1.59 mm).
Connectors
J1, J2, J3: PMC PCI-X signals.
J4 : PMC user signals (rear I/O).
J5: Auxiliary power connector (PCIe graphics).
J6: Board-to-board connection of J4 user signals.
JP1: Power source select jumper.
JP2: JTAG I/O voltage select jumper.
P1: PCI Express V1.1 x4 lanes card edge.
P3: Fan power.
P4: JTAG (Xilinx programming adapter).Approvals
CE marked, FCC Part 15, Class A
-
Features & Benefits
- One PMC module slot
- 4-lane PCI Express interface
- PCI-X interface supports 32/64-bit addressing, 32/64-bit data bus at up to 100MHz operation
- Carrier routes 32 differential pairs to rear connector for LVDS I/O from the PMC module
- JTAG connector supports Xilinx programmer for use with hosted FPGA modules
- Cooling fan
- Auxilliary power connection for 12V source
- Diagnostic LEDs indicate communication speed
-
Specs & Data Sheets
-
Accessories
-
Conformal Coating
Moisture and humidity protection for boards via Acromag applied conformal coating using acrylic resin (Humiseal 1B31). -
SCSI Cable - 5025-913
- CS Electronics internal SCSI cable
-
-
Additional information
Additional information
Weight N/A Dimensions N/A Part Number APCe8670: PCI Express carrier card for PMC modules
Please login to submit this form.