AP513: Quad Isolated Serial RS232 Communication Module
Please sign in or register to see model options and to add products to your cart.
Product short description:
- Four Isolated RS232 Serial Ports
- Extended Temperature
- PCIe Bus Interface
These modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution.
Click here to watch a short video highlighting the features of Acromag’s AP500 Series.
AP513: Quad Isolated Serial RS232 Communication Module Description
AP513 quad isolated serial RS232 communication modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution.
Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. RTS/CTS handshake support for modem control is also included.
For more efficient data processing, each serial port is equipped with 256-character FIFO buffers on the transmit and receive lines. The large buffers minimize CPU interaction for improved system performance
The data ports generate individually controlled transmit, receive, line status, data set, and flow control interrupts. All interrupts can be read from a single register.
The AcroPack® product line updates our popular Industry Pack I/O modules with a PCIe interface format. This tech-refresh design offers a compact size, low-cost I/O, the same functionality of the existing Industry Pack modules and a rugged form factor.
AcroPack modules are only 30mm wide and 70mm long. This is just 19.05mm longer than a full length mini PCIe card but the same width. AcroPacks also use standard mPCIe board hold down standoffs and screw keep out areas.
A down facing 100 pin Samtec connector mates with the carrier card. Fifty of these pins are available for field I/O signals. Pin spacing and signal assignments will allow for 100V of port to port isolation.
Learn more about the AcroPack Series and view all the models >
AP513: Quad Isolated Serial RS232 Communication Module Benefits & Features
- Four isolated RS232 serial ports
- Each port isolated (250V) from digital circuitry and (100V) from the other 3 ports
- Internal isolated power created on-board
- Exar Quad UART with 16550-compatible register set
- 256-byte TX and RX FIFOs with programmable triggers for improved system performance
- Programmable baud rate (up to 1Mbps) on each channel with fractional divisors
- Interrupt support with individually controlled transmit, receive, line status, and data set
interrupts - Each channel provides handshake support (RTS, CTS) to simplify interfacing with modems
- General purpose 16-bit timer/counter with internal 125MHz clock supporting single-shot, re-trigger, and interrupts
- Line-break and false start-bit detection
Learn more about the AcroPack Series and view all the models >
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
APSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Programming interface with function routines for AcroPack modules/carriers.
- Customizable for other operating systems.
Additional information
Weight | 0.8 oz |
---|---|
Dimensions | 3.25 × 1.25 × 1 in |
Part Number | AP513E-LF: Four isolated RS232 serial ports. |
Communication | Serial RS232 Communication |
Product Series | AcroPack Series |
-
Description
AP513: Quad Isolated Serial RS232 Communication Module Description
AP513 quad isolated serial RS232 communication modules provide four isolated serial communication ports from a single AP carrier slot for a high-density solution.
Software-configuration helps you quickly set baud rates, character-sizes, stop bits, and parity. RTS/CTS handshake support for modem control is also included.
For more efficient data processing, each serial port is equipped with 256-character FIFO buffers on the transmit and receive lines. The large buffers minimize CPU interaction for improved system performance
The data ports generate individually controlled transmit, receive, line status, data set, and flow control interrupts. All interrupts can be read from a single register.
The AcroPack® product line updates our popular Industry Pack I/O modules with a PCIe interface format. This tech-refresh design offers a compact size, low-cost I/O, the same functionality of the existing Industry Pack modules and a rugged form factor.
AcroPack modules are only 30mm wide and 70mm long. This is just 19.05mm longer than a full length mini PCIe card but the same width. AcroPacks also use standard mPCIe board hold down standoffs and screw keep out areas.
A down facing 100 pin Samtec connector mates with the carrier card. Fifty of these pins are available for field I/O signals. Pin spacing and signal assignments will allow for 100V of port to port isolation.
Learn more about the AcroPack Series and view all the models >
AP513: Quad Isolated Serial RS232 Communication Module Benefits & Features
- Four isolated RS232 serial ports
- Each port isolated (250V) from digital circuitry and (100V) from the other 3 ports
- Internal isolated power created on-board
- Exar Quad UART with 16550-compatible register set
- 256-byte TX and RX FIFOs with programmable triggers for improved system performance
- Programmable baud rate (up to 1Mbps) on each channel with fractional divisors
- Interrupt support with individually controlled transmit, receive, line status, and data set
interrupts - Each channel provides handshake support (RTS, CTS) to simplify interfacing with modems
- General purpose 16-bit timer/counter with internal 125MHz clock supporting single-shot, re-trigger, and interrupts
- Line-break and false start-bit detection
Learn more about the AcroPack Series and view all the models >
-
Specs & Data Sheets
-
Software
-
Accessories
-
AP-CC-01: Conduction-Cool Kit
- Required for conduction-cooled applications using an AcroPack
-
APSW-API: I/O Function Routines for VxWorks, Windows, Linux
- Programming interface with function routines for AcroPack modules/carriers.
- Customizable for other operating systems.
-
-
Additional information
Additional information
Weight 0.8 oz Dimensions 3.25 × 1.25 × 1 in Part Number AP513E-LF: Four isolated RS232 serial ports.
Communication Serial RS232 Communication
Product Series AcroPack Series
Please login to submit this form.