Home » Signal Conditioners & Network I/O » Temperature Transmitters » Thermocouple Input - Temperature Transmitters
Thermocouple transmitters convert Type J, K, T, E, R, S, B, or N thermocouple sensor input signals to 4-20mA or 0-10V DC outputs for interfacing to controllers or other instrumentation.

Showing the single result

  • Compare
    Compare

    TT333: Thermocouple / milliVolt Input Four-wire Transmitter

    • Universal thermocouple / millivolt input
    • Universal current / voltage output
    • 12-32V DC local / bus power
    The TT333 model is a space-saving four-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional control signal. DC current and voltage output are both supported on a single model. Click here to watch a short video highlighting the TT330 Series.    
    Select options

Thermocouple Temperature Transmitters - Continued

Green Separator Line

Points of Consideration When Using Thermocouples to Measure Temperature 

Thermocouples work by measuring the voltage produced by the junction of two different metals. The voltage produced is proportional to the temperature difference between the two metals, and this voltage can be measured and used to determine the temperature at the junction.

However, there are several sources of error that can affect the accuracy of thermocouple temperature measurements, including the reference junction temperature, lead wire resistance, cold junction compensation, thermal EMF, thermal conductivity, and self-heating.

It is important to consider these potential sources of error and take steps to minimize them in order to achieve accurate temperature measurements using thermocouples.

In some cases, it may be necessary to use another type of temperature sensor, such as an RTD transmitter, in order to achieve the desired accuracy.

12 Points to Consider When Using Temperature Thermocouple Transmitters

  1. Thermocouple Sensor Inaccuracy
  2. Thermocouple Sensor Non-Linearity
  3. Thermocouple Sensor Sensitivity
  4. Sensor Drift, Aging, and De-Calibration
  5. Choice of Extension Wire
  6. Response Time
  7. Cold Junction Compensation
  8. Connection Problems
  9. Thermal Shunting and Immersion Error
  10. Lead Resistance
  11. Noise
  12. Common-Mode Voltage

Download Temperature Measurement Using Thermocouples Industry Technology Paper for more information.