Home » Embedded I/O & Processing Solutions » Industry Pack Mezzanine I/O Modules

Industry Pack and Mezzanine I/O Modules for VME, PCI and CompactPCI Systems

Acromag Industry Pack mezzanine I/O modules deliver maximum I/O density when used with industry-standard IP carrier cards for VME, PCI, CompactPCI, or PCI Express. These plug-in Industry Pack modules give you mix-and-match flexibility and high channel density to save your valuable card slots. Combining different IP types on one carrier simplifies the design of a low-cost, custom I/O board.

Showing 1–16 of 27 results

  • Compare
    Compare

    IP500A: Serial Communication, 232 Industry Pack Module

    • Four asynchronous EIA/TIA-232E serial ports
    • 16-byte FIFO buffers
    • Interrupt support
    • Programmable baud rate (up to 128Kbps)
    Select options
  • Compare
    Compare

    IP560: CAN Bus Interface Industry Pack Modules

    • Two CAN bus channels with optional isolation
    • NXP SJA1000 CAN controller with TJA1043 transceiver
    Select options
  • Compare
    Compare

    IP570: MIL-STD-1553 Bus Interface Modules

    • One or two 1553 interface channels
    • DDC Micro-ACE controls 1553 interface
    Select options
  • Compare
    Compare

    IP-EP200: Cyclone II FPGA with Digital I/O (JTAG-configured)

    • Up to 48 TTL or 24 differential RS485
    • Altera Cyclone II EP2C20 FPGA programmable via JTAG port or via the IP bus directly
    This series of plug-in mezzanine modules provides a user-customizable Altera® Cyclone II FPGA on an Industry Pack (IP) module.  
    Select options
  • Compare
    Compare

    IP220A: Analog Output Industry Pack Module, 12-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 11µS settling time
    • ±10V output range
    The IP220A outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare
    Compare

    IP230A: Analog Output Module, 16-bit D/A

    • 4 or 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare
    Compare

    IP231: Analog Output Module, 16-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 13µS settling time
    • ±10V output range
    The IP231 outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare
    Compare

    IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer

    • 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP235A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare
    Compare

    IP236A-8 16-bit D/A Analog Output with FIFO Buffers

    End of Life. Consult factory for alternative solutions.
    • 8 voltage output channels
    • Individual 16-bit D/A converter on each channel
    • Individual clock on each channel supporting rates of up to 100KHz
    • FIFO memory buffers (128 samples/channel)
    IP236A-8 modules have 16-bit D/A converters (DAC) to provide highly-accurate analog voltage outputs.  
    Select options
  • Compare
    Compare

    IP320A: Analog Input Module, 12-bit A/D

    • 20 differential or 40 single-ended input channels
    • 200KHz throughput
    • 4.5µS/conversion
    • Selectable input range (±5V, ±10V, 0-10V)
    The IP320A monitors 20 differential or 40 single-ended input channels.
    Select options
  • Compare
    Compare

    IP330A: Analog Input Module, 16-bit A/D

    • 16 differential or 32 single-ended input channels
    • 200KHz throughput
    • 5µS/conversion
    • Selectable input range (±5V, ±10V, 0-5V, 0-10V)
    IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.
    Select options
  • Compare
    Compare

    IP340: Analog Input Module, Simultaneous Sample & Hold

    • 16 differential inputs (two 8-channel groups)
    • 12 or 14-bit A/D
    • 125KHz throughput
    • 8µS conversion time for 8-channel group
    • 512 sample FIFO buffer, ±10V input range
    IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.
    Select options
  • Compare
    Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare
    Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare
    Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare
    Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options

Industry Pack Continued

Green Separator Line

Select from a broad range of Acromag Industry Pack I/O products and mezzanine I/O modules. Popular modules include high-speed and high-resolution A/D and D/A, digital I/O, serial communication, and re-configurable FPGA functions. Isolation to protect your system is available on many modules.

To further simplify the integration of IP modules into your host system, Acromag provides several software support packages. And for easier I/O connections, accessories, such as termination panels, cables, and adapters, are also available.

Are you looking to modernize your system? The new AcroPack® product line updates our popular Industry Pack I/O modules with the mPCIe interface format. We added 19mm and a 100 pin connector to provide up to 50 isolated rear I/O signals, to give you a tremendous amount of capability on an extremely small footprint - without cabling!