AcroPack® modules improve on the mini PCIe form factor by adding a down-facing connector that securely routes I/O signals through the host carrier card without any extra cabling. Carrier cards are available in Mini-ITX, PCIe, VPX, XMC and other formats. These carriers provide direct access to the field I/O signals through front-panel CHAMP connectors or the rear backplane. At only 30 x 70mm per module, up to four AcroPacks can plug into a single carrier card in any I/O combination. More than 25 AcroPack modules are now offered for a wide variety of analog I/O, digital I/O, communication, and FPGA computing functions. Avionics, fieldbus, and other functions are coming soon.

Showing 1–16 of 37 results

  • Compare

    5028-621 Breakout Panel

    Breakout panel for AP570 series. Converts 68-pin CHAMP to two TRB jacks and one DB15 connector.
    Select options
  • Compare

    ACPS3310: 3U CPCI® Serial Carrier Card for AcroPack Modules

    • Front I/O access
    • Two isolated I/O expansion slots (AcroPack® or mPCIe)
    The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    ACPS3320-RTM: Rear Transition Module

    • Provides easy access to AcroPack Field I/O
    • 68 pin dual stack 0.8mm Champ connector
    • Marker on the front panel for easy identification
    Select options
  • Compare

    ACPS3320: 3U cPCI® Serial Carrier Card for AcroPack Modules

    • Rear I/O access
    • Two I/O expansion slots (AcroPack or mPCIe)
    The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules.
    Select options
  • Compare

    AP220: 12-Bit DAC Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Extended temperature range
    • PCIe bus interface
    The AP220 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP220.  
    Select options
  • Compare

    AP225: 12-Bit D/A Converter Voltage Waveform Output Module

    • 12-bit DAC
    • 16 channels voltage outputs
    • Wide temperature range
    • PCIe bus interface
    The AP225 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP225 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP225.
    Select options
  • Compare

    AP226: 12-bit DAC Module

    • 12-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • Extended temperature range
    • PCIe bus interface
    The AP226 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP231: 16-Bit DAC Module

    • 16-bit DAC
    • 16 channel voltage output
    • Wide temperature range
    • PCIe bus interface
    The AP231 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack® modules, up to 32 voltage outputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP231.
    Select options
  • Compare

    AP235: 16-Bit DAC Voltage Waveform Output Module

    • 16-bit DAC
    • 16 channels voltage output
    • Waveform memory
    • Extended temperature range
    • PCIe bus interface
    The AP235 outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds two AcroPack AP modules, up to 32 voltage outputs can be obtained from a single card cage slot. The AP235 is ideal for waveform generation application that require high speed capabilities. Click here to watch a short video highlighting the features of the Acromag AP235.
    Select options
  • Compare

    AP236: Isolated 16-bit DAC Module

    • 16-bit DAC
    • 8 channels voltage output
    • Isolated analog voltage output
    • PCIe bus interface
    The AP236 outputs analog voltage signals to drive up to 8 devices. When used with a carrier that holds four AcroPack modules, up to 32 voltage outputs can be obtained from a single card cage slot.
    Select options
  • Compare

    AP323: 16-Bit ADC High Density Analog Input Module

    • 16-bit ADC
    • 20 differential or 40 single-ended channels
    • Wide temperature range
    • PCIe bus interface
    The AP323 AcroPack model monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four AP modules, up to 160 inputs can be obtained from a single card cage slot. Click here to watch a short video highlighting the features of the Acromag AP323.
    Select options
  • Compare

    AP341: 14-Bit High-Density ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 16 differential inputs with ±10V DC input range
    • 8µs conversion time (125kHz) for 8-ch. bank
    The AP341 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to eight channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control. Click here to watch a short video highlighting the features of the Acromag AP341.
    Select options
  • Compare

    AP342: 14-bit High-Density Isolated ADC Module

    • 14-bit ADC with simultaneous multi-channel conversion
    • 12 differential inputs with ±10V DC input range
    • 8μs conversion time (125kHz) for 6-ch. bank
    The AP342 AcroPack provides fast, high resolution, simultaneous A/D conversion of up to six channels. Simultaneous channel conversion and on-board memory enable megahertz throughput rates. Programmable interrupts simplify data acquisition by providing greater control.
    Select options
  • Compare

    AP408: High Voltage Digital Input/Output Module

    • 32 Digital I/O Channels
    • High impedance
    • PCIe Bus Interface
    The AP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP408.
    Select options
  • Compare

    AP418: High Voltage Digital Input/Output Modules

    • 16 digital I/O channels
    • High impedance
    • Extended temperature
    • PCIe Bus Interface
    The AP418 monitors or controls the on/off (high/low) status of up to 16 devices. Each channel can be used as an input or output. Click here to watch a short video highlighting the features of the Acromag AP418.
    Select options
  • Compare

    AP441: Isolated Digital Input with Interrupts Module

    • 32 isolated digital input channels
    • Extended temperature: -40 to 85°C
    • PCIe bus interface
    AP441 modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels. Click here to watch a short video highlighting the features of the AP441.
    Select options

AcroPack Series - Continued

Green Separator Line

AcroPack Mini PCIe-Based Mezzanine Modules

Acromag’s new state-of-the-art AcroPack® mPCIe-based rugged mezzanine modules deliver maximum I/O density when used with AcroPack carrier cards for CompactPCI® Serial, Mini-ITX Com Express Type 10, PCIe, XMC or VPX-based systems. Mix-and-match different AcroPack module types on one carrier for custom applications. 

Download a pdf brochure that features all AcroPack models.

AcroPack Advantages and Features

  • A/D, D/A, Ethernet, counter/timers, communication (Ethernet, serial, MIL-STD-1553), digital I/O and FPGA functions
  • CompactPCI® Serial, Mini-ITX Com Express Type 10, PCIe, XMC or VPX carriers
  • Low-power consumption
  • -40 to 70°C standard operating temperature

Watch a short video explaining the benefits of the AcroPack Series

Designed for COTS Applications

Designed for COTS applications these general purpose I/O modules deliver high-speed and high-resolution A/D and D/A, digital I/O, Ethernet, MIL-STD-1553, serial communication, and re-configurable FPGA functions. Utilizing all solid-state components, these modules consume very little power and are designed to perform in commercial as well as extreme environments from -40 to 85 deg.C for conduction-cooled applications.

To further simplify the integration of AcroPack mezzanine modules into your host system, they maintain the same functionality and memory map of Acromag’s existing Industry Pack (IP) modules.

Acromag provides software support packages for embedded applications running on Linux, Windows, or VxWorks operating systems. These libraries provide generic routines to handle reads, writes, interrupts, and other functions. Demonstration programs enable the developer to quickly exercise the I/O modules before attaching the routines to the application program. This diagnostic tool can save hours of troubleshooting and debugging.

These modules feature a solid down connector I/O interface that replaces flimsy ribbon I/O cables. Watch a video demonstrating this. 

The COTS product line of AcroPacks are RoHS compliant and are ideal for scientific development labs, military and aerospace applications, the defense industry, and automation applications.

Because We Know I/O

Because We Know I/O

Doing business with Acromag means you can count on our 60+ years of industry knowledge when choosing your supplier. A global network of sales professionals gives you local access to friendly, highly trained support specialists. At the US factory, we guarantee support with a real person within one business day.