Home » Embedded I/O & Processing Solutions
The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 15 results

  • Compare
    Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare
    Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare
    Compare

    IP220A: Analog Output Industry Pack Module, 12-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 11µS settling time
    • ±10V output range
    The IP220A outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare
    Compare

    IP230A: Analog Output Module, 16-bit D/A

    • 4 or 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP230A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare
    Compare

    IP231: Analog Output Module, 16-bit D/A

    • 8 or 16 voltage output channels
    • Independent D/A converter on each channel
    • 13µS settling time
    • ±10V output range
    The IP231 outputs analog voltage signals to drive up to 16 devices.
    Select options
  • Compare
    Compare

    IP235A: Analog Output Module, 16-bit D/A w/RAM Buffer

    • 8 voltage output channels
    • Individual D/A converters on each channel
    • 10µS settling time
    • Selectable output range (±5V, ±10V, 0-10V)
    IP235A modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs.
    Select options
  • Compare
    Compare

    IP236A-8 16-bit D/A Analog Output with FIFO Buffers

    End of Life. Consult factory for alternative solutions.
    • 8 voltage output channels
    • Individual 16-bit D/A converter on each channel
    • Individual clock on each channel supporting rates of up to 100KHz
    • FIFO memory buffers (128 samples/channel)
    IP236A-8 modules have 16-bit D/A converters (DAC) to provide highly-accurate analog voltage outputs.  
    Select options
  • Compare
    Compare

    IP320A: Analog Input Module, 12-bit A/D

    • 20 differential or 40 single-ended input channels
    • 200KHz throughput
    • 4.5µS/conversion
    • Selectable input range (±5V, ±10V, 0-10V)
    The IP320A monitors 20 differential or 40 single-ended input channels.
    Select options
  • Compare
    Compare

    IP330A: Analog Input Module, 16-bit A/D

    • 16 differential or 32 single-ended input channels
    • 200KHz throughput
    • 5µS/conversion
    • Selectable input range (±5V, ±10V, 0-5V, 0-10V)
    IP330A Industrial I/O Pack (IP) modules provide fast, high-resolution A/D conversion.
    Select options
  • Compare
    Compare

    IP340: Analog Input Module, Simultaneous Sample & Hold

    • 16 differential inputs (two 8-channel groups)
    • 12 or 14-bit A/D
    • 125KHz throughput
    • 8µS conversion time for 8-channel group
    • 512 sample FIFO buffer, ±10V input range
    IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight channels.
    Select options
  • Compare
    Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options
  • Compare
    Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPX™ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options
  • Compare
    Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare
    Compare

    VPX4850 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports full Jn6 rear I/O
    The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare
    Compare

    XMCAP2000: XMC Carrier Card for AcroPack® Modules

    • Two AcroPack or mini-PCIe mezzanine module slots
    • Non-Intelligent carrier card
    • PCIe x4 interface
    This board interfaces two AcroPack mezzanine modules to a PCI Express bus on an air-cooled XMC carrier. Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems