The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing 1–16 of 22 results

  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    AXM-A30: Analog Input Extension I/O Module for PMC FPGAs

    • High-Speed Analog Input
    • Two Differential Channels
    • Two 16-bit A/D Channels
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), and PMC-VLX/VSX/ VFX (Virtex-5 FPGA) modules.
    Select options
  • Compare

    AXM-A75: Multi-function I/O for PMC & XMC FPGAs

    • 16 analog inputs, simultaneous A/D
    • 8 analog outputs, simultaneous D/A
    • 16 digital I/O channels
    The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector.
    Select options
  • Compare

    AXM-D Series: Digital I/O Extension Modules for PMC & XMC FPGAs

    • Plug-In I/O Modules
    • Choose from four I/O Options
    • JTAG Support Option
    These extension modules plug into the front mezzanine on Acromag’s PMC-LX/SX (Virtex®-4 FPGA), PMC-VLX/VSX/VFX (Virtex-5 FPGA) modules, and PMC-SLX (Spartan-6 FPGA) modules.
    Select options
  • Compare

    AXM-Z01: Peripheral I/O Extension Modules for XMC FPGAs

    • Gigabit ethernet over copper wire 1000BASE-T from the Zynq PS
    • USB 3.0 from the Zynq PS
    • USB-UART from the Zynq PS provides a debug terminal port
    • Mini Display Port from the Zynq PS
    AXM module with RJ45 Gigabit Ethernet, USB 3.0, mini DisplayPort, and USB UART mini-B ports.
    Select options
  • Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options
  • Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPXâ„¢ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options
  • Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    VPX4850 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports full Jn6 rear I/O
    The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    XMC-7A CC: User-Configurable Conduction-Cooled Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA.
    • XMC module with PCIe interface
    • Conduction-Cooled
    XMC-7A200CC modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7A: User-Configurable Artix-7 FPGA Modules with Plug-In I/O

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    Acromag’s XMC-7A modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.  
    Select options
  • Compare

    XMC-7A50-AP323: XMC Module with Artix 7 FPGA and High-Density I/O

    • Reconfigurable AMD Artixâ„¢ 7 FPGA
    • 48 Digital I/O
    • 20 Diff or 40 SE Analog Inputs
    • 16-bit ADC
    The XMC-7A50-AP323 series provides a FPGA based user-configurable bridge between a host processor and a custom digital interface via PCI Express. These XMC boards feature a best-in-class Artix 7 interface to deliver the industry’s lowest power and high performance.
    Select options
  • Compare

    XMC-7AWP: User-Configurable Artix-7 FPGA Modules

    • Logic-optimized Artix-7 FPGA
    • XMC module with PCIe interface
    • Write-protected flash
    Acromag’s XMC-7AWP modules feature a high-performance user-configurable Xilinx® Artix®-7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K AX: User-Configurable AMD Kintex 7 FPGA Modules with Plug-In I/O

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • I/O Extension Mezzanine Modules
    XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options
  • Compare

    XMC-7K CC: User-Configurable Conduction-Cooled AMD Kintex 7 FPGA Modules

    • Logic-optimized AMD Kintex 7 FPGA
    • XMC module with PCIe interface
    • Conduction-Cooled
    Acromag’s XMC-7K modules feature a high-performance user-configurable AMD Xilinx® Kintex® 7 FPGA enhanced with high-speed memory and a high-throughput serial bus interface.
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems