The Embedded Computing and I/O Solutions division is focused on high-performance processors, FPGA boards, and I/O products for applications that demand rugged high-performance precise operation.

Showing all 16 results

  • Compare

    APCe8675: Non-intelligent carrier card

    • 8-lane PCI Express interface
    • Holds one XMC module
    The APCe8675 is a PCIe bus adapter board that allows a PC (PCIe bus master) to control and communicate with the hosted XMC module. It simply acts as an adapter to route signals between the system’s PCIe bus and the XMC module connector.
    Select options
  • Compare

    APCe8775: PCI Express Carrier Card for XMC Modules

    • One XMC mezzanine module slot
    • 3/4-length
    • Non-Intelligent carrier card
    • PCIe x8 interface
    Acromag’s APCe8775 carrier card interfaces an XMC mezzanine module to a PCI Express bus in a PC-based desktop computer system.
    Select options
  • Compare

    IP400: Digital Input Module, High Voltage Inputs

    • 40 input channels
    • 0-60V DC input range
    • Change-of-state/level interrupts (up to 12 channels)
    The IP400 can monitor the on/off (high/low) status of up to 40 devices.
    Select options
  • Compare

    IP405: Digital Output Module, High Voltage Outputs

    • 40 low-side switch output channels
    • 0-60V DC output range
    • High output current (up to 1A per channel)
    The IP405 controls up to 40 low-side switches (open-drain MOSFETs).    
    Select options
  • Compare

    IP408: Digital Input/Output Module, High Voltage I/O

    • 32 bi-directional digital input and/or output channels
    • 0-60V DC input and output range
    • Low-side output switches
    • Outputs sink up to 1A per channel
    • Change-of-state and level interrupts (up to 8 channels)
    The IP408 monitors or controls the on/off (high/low) status of up to 32 devices. Each channel can be used as an input or output.
    Select options
  • Compare

    IP409: Digital Input/Output Module, Differential I/O

    • 24 differential digital input and/or output channels
    • Ruggedized RS-422A/485 transceivers
    • Interrupt support on all channels (change-of-state and high or low level transition)
    The IP409 provides 24 differential I/O channels with interrupts. Each channel is programmable as an input or an output on a bit basis, in any combination.
    Select options
  • Compare

    IP440A: Digital Input Module, Isolated

    • 32 port-isolated input channels
    • ±60V AC/DC input (three ranges)
    • Interrupt support for each channel
    IP440A Industrial I/O Pack (IP) modules provide 32 optically isolated inputs to safely monitor a wide range of digital input voltage levels.
    Select options
  • Compare

    IP445A: Digital Output Module, Isolated

    • 32 port-isolated output channels (bipolar solid state relays)
    • ±60V AC/DC output
    • High/low-side switch configuration
    IP445A modules provide 32 isolated solid-state relay outputs to safely control discrete devices.
    Select options
  • Compare

    IP470A: Digital Output Module, TTL Level

    • 48 bi-directional input/output channels
    • TTL-compatible inputs
    • CMOS-compatible open-drain outputs
    • Interrupt support for each channel
    IP470A Industrial I/O Pack (IP) modules provide 48 general-purpose, bidirectional I/O points to economically monitor and control a large quantity of digital devices.
    Select options
  • Compare

    VPX4520: VPX Carrier Card for AcroPack® Modules

    • PCIe x16 Gen 3 interface via Expansion plane
    • One XMC and Four AcroPack slots
    • 6U form factor
    The VPX4520 carrier card provides a simple and cost-effective solution for interfacing one XMC and four AcroPack modules to a VPX computer system. Click here to watch a short AcroMaggie video highlighting the VPX4520 features.  
    Select options
  • Compare

    VPX4521: VPX Carrier Card for AcroPack® Modules

    • PCIe x16 Gen 3 interface via Data plane
    • One XMC and Four AcroPack slots
    • 6U form factor
    The VPX4521 is a member of a 6U OpenVPX mezzanine carrier card family that supports a simple and cost-effective solution for interfacing XMC or AcroPack modules to OpenVPX computer systems. Click here to watch a short AcroMaggie video highlighting the VPX4521 features.    
    Select options
  • Compare

    VPX4812A / VPX4814A: VPX Carrier Cards for XMC Modules

    • Air-cooled, conduction-cooled and REDI versions
    • 3U Single XMC slot
    • PCIe x8 Gen 2 interface
    The VPX4812A can be used as a VPX switch card allowing a host CPU to communicate with up to 3 downstream cards in addition to the XMC card. Each VPX port can be configured to be x4 or x8. The VPX4814A is a peripheral XMC carrier board designed to be used in a system that uses a VPX AcroExpress® CPU.  
    Select options
  • Compare

    VPX4821A: VPX Carrier Cards for XMC or PMC Modules

    • Air-cooled and conduction-cooled versions
    • 6U dual PMC/XMC slots
    • PCIe bus 16-lane Gen 1 or 2 interface switch on data plane
    The VPX4821A carrier card provides a simple and cost-effective solution for interfacing a PMC or XMC module to a VPX computer system. Connect to the OpenVPXâ„¢ via Data plane for a direct PCIe connection over the VPX backplane. This allows host processors access to a high-performance, low latency interconnect to the PMC and XMC modules on the carrier card.
    Select options
  • Compare

    VPX4840 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports the Jn6 differential signals and legacy I/O from Jn4
    The VPX4840 carrier cards provide a simple and cost-effective solution for interfacing an XMC module to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    VPX4850 Series: 6U VPX Carrier Cards for XMC Modules

    • Two XMC slots
    • PCIe x16 Gen 3 interface via Expansion or Data plane
    • Air or Conduction-cooled
    • Supports full Jn6 rear I/O
    The VPX4850 carrier cards provide a simple and cost-effective solution for interfacing XMC modules to a VPX computer system. They offer host processors low latency access to the XMC modules through high-speed interconnects on the carrier card.
    Select options
  • Compare

    XMCAP2000: XMC Carrier Card for AcroPack® Modules

    • Two AcroPack or mini-PCIe mezzanine module slots
    • Non-Intelligent carrier card
    • PCIe x4 interface
    This board interfaces two AcroPack mezzanine modules to a PCI Express bus on an air-cooled XMC carrier. Two AcroPack module slots give you the freedom to mix a variety of I/O functions (A/D, D/A, digital in, digital out, serial I/O, etc.) on a single board.  
    Select options

Embedded I/O Processing Solutions

Acromag’s embedded I/O boards and mezzanine modules are ideal for embedded computer and high-performance control systems. Select from VPX, PCI, CompactPCI, VME, mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC cards to perform a broad range of analog, digital, counter/timer I/O and serial and Ethernet communication functions.

Mini PCIe-based AcroPack®, Industry Pack, VPX, XMC and PMC mezzanine embedded I/O modules plug into VPX, PCI, PCIe, CompactPCI, and other carrier cards to perform A/D, D/A, DIO, counter/timer, communication and other functions.

Acromag embedded I/O boards offer an unmatched balance of features, performance, and price for the best values in embedded I/O. These boards are based on technology and circuit designs with time-tested reliability in thousands of installations.

Real-Time Control Systems